Payment & Shipping Terms:
|Item:||Stell Member Fusion Splice Sleeve Heat Shrink Fiber Tubing Protector||Length:||60mm|
Dia. 2.5mm x 60mm stell member fusion splice sleeve heat shrink fiber tubing protector clear color
This fusion protection sleeve uses smaller components than standard ones and make it possible to fit more splices in the splace tray.
It has a steel strength member,inner fiber tube and outer shrink tube,after hear shrinking the size is 2.5mm diameterx60mm length.
It is designed for single fiber application and accomodates up to 1.4mm coated fibers,the color is clear.
|Hot-melt tube||Steel needle|
|Type||After recover(mm)||Length(mm)||inside dia.(mm)||Length(mm)||Dia.(mm)||Length(mm)|
Moisture resistant and environmental protection
Clear sleeve make it easy to detect splice before shrinkage
Easily to use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation
Operating temperature range
Operating temperature:-45℃~100℃/-45℃~135℃ Minimum shrink temperature: 80℃
Minimum fully recovery temperature:120℃