One Click Cleaner 1.25mm For Ferrule Endface Cleaning

Fiber Optic Tools of LC / MU one click cleaner - 1.25mm for ferrule endface cleaning

Fiber Optic Cleaner-Mini Designed to specially work well with the LC,MU,SC, FC, ST and MPO connectors, this instrument cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face.

The LC/MU Cleaner is a high-performance device designed for cleaning the ferrule end-faces of LC&MU connectors. Cost effective tool for cleaning fiber end-faces without the use of alcohol. The LC/MU connector cleaner is designed to clean both exposed jumper ends and connectors in Adapters.

LC/MU 1.25mm One click Cleaner is an innovative design of the new fiber end-face cleaner, using a special dust-free clean wire material and full contact cleaning way, different types of pollution can be cleaned at one time and cleaning effect is better. This pen can be used to clean the LC / MU connectors, male or female is ok

Structure Drawing & Specification

AS for the structure of cleaner, It can be divided into the cover guide cap, guide cap, cleaning tip and a body part. Cover guide cap protects cleaner from dust; guide cap is used for connecter cleaning; cleaning tip can be extended for adapter cleaning; cleaning body is used for adjusting the position of tip as standard position or extended position.

Features

• Cleans connectors on jumpers and in adapters
• Ergonomic, comfortable design with single action cleaning
• Effective on a variety of contaminators including dust and oils
• Disposable with 800+ cleanings per unit
• Made from anti-static resin
• Cleaning micro fibers are densely stranded and debris free
• Extendable tip reaches recessed connectors
• Cleaning system rotates 180 for a full sweep
• Audible click when engaged

Application

The LC/MU 1.25mm One-click Cleaner is dry cloth cleaners specially designed to clean single connector residing in an adapter, faceplate or bulkhead. They are simple to use and highly effective at removing oil and dust contaminants. That can negatively impact optical performance.

Fiber Optic Cleaning Guide

Why Should We Clean the Connectors?

Research has shown over 85% of fiber optic network failures in data centers, campus, and other optical communication facilities are caused by contamination on the optical connector end face.

For best optical performance, it is imperative that all optical fiber connections are clean and free of contaminants. Fiber optic cleaning products is being highly recommended as a kind of very important tool for electrical manufactures. One of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.

OMC's fiber optic connector cleaner is designed to effectively and quickly clean connector end faces, both the unmated patch cord and through the adapter. It cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face. It is very easy to use and suitable for LC/SC/FC/ST/MU/D4/DIN connectors.