Water Proofing Outdoor Multimode Fiber Optic Cable With High Strength Loose Tube

Stranded Loose Tube No-metallic Strength Member Armored Cable Ⅲ GYFTA Outdoor Fiber Cable

Product details

Outdoor Optical fiber cable positioned between CO and first DP in FTTX network. Used as mainline cable which environment
is in Buried ,Aerial, under earth Pipes, Poles etc.

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a waterresistant
filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, the cable is completed with a PE sheath.

Characteristics

Good mechanical and temperature performance

High strength loose tube that is hydrolysis resistant

Special tube filling compound ensure a critical protection of fiber

Specially designed compact structure is good at preventing loose tubes from shrinking

PE sheath protects cable from ultraviolet radiation

The following measures are taken to ensure the cable watertight:

Single Fiber Reinforced Plastic as the central strength member

Loose tube filling compound

100% cable core filling

APL moisture barrier

Standards:IEC 60794-1.

Technical Parameters.

Note:

Suffix X denotes fiber type.

The nominal value of the PE sheath thickness is 1.6mm

Package

OMC offers two types of cable package. Package 1 is usually for indoor, light weight cables. Package 2 is usually for outdoor, heavy weight cables. Usually we only attach Test Report on the out package of the cable, but we could also mark as your requirements.