|Place of Origin:||Shenzhen,China|
|Brand Name:||OEM or OMC|
|Certification:||ROHS and ISO|
|Model Number:||12 Fibres 9 / 125μm 2.0mm MPO Female To MPO Female|
|Minimum Order Quantity:||5pcs|
|Packaging Details:||One piece in a plastic bag, several pieces in the carton of 54*39*35cm carton|
|Payment Terms:||Western Union, T/T, Paypal|
|Supply Ability:||1000000pcs per month|
|Products:||12 Fibre MTP Trunk Cable 9 / 125μm 2.0mm USconec MTP / APC Female To MTP / APC Female OS2 G657A2 LSZH Jacket Yellow||Insertion Loss:||≤0.35dB(Low Loss)|
|Return Loss:||≥60dB||Cable Diameter:||2.0mm|
|Fiber Type:||9 / 125μm||Material:||PVC/LSZH Jacket|
|Interchangeability:||≤0.2dB||Certification:||IEC-61754-7; JIS C5982; TIA-604-5(FOCIS5); Telcordia GR-1435-CORE|
mtp breakout cable,
mtp patch cable
12 Fibre MTP Trunk Cable 9 / 125μm 2.0mm USconec MTP / APC Female To MTP / APC Female OS2 G657A2 LSZH Jacket Yellow
12F MTP(Female)- MTP(Female) 3.0mm LSZH Patch cable/trunk cable. MPO Fiber Patch cable/trunk cable is terminated with MTP connector on both ends. MTP Patch cable/trunk cables connect MPO modules together as a permanent link. The Patch cable/trunk cables are available with 12, 24, 48,60,72 ,96,144fibers. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MTP fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MTP also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassette with the new connector style on the cross-connect side of the patch panel.
The merits of MTP/MPO Patch cable/trunk cable generally include:
High quality—MTP/MPO Patch cable/trunk cables are factory pre-terminated, tested and packaged along with the test reports. These reports serve as long-term documentation and quality control.
Decreasing cable volume—MTP/MPO Patch cable/trunk cables have very small diameters, which decrease the cable volume and improve the air-conditioning conditions in data centers.
Time saving—With the special plug and play design, MTP/MPO Patch cable/trunk cables can be incorporated and immediately plugged in. It greatly helps reduce the installation time.
All of OMC’s MTP Connectors are from USconec. MTP Patch cable/trunk cable is a kind of high density cable assemblies which is generally use in three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
The 12F MTP-MTP Patch cable/trunk cable is designed for 40G QSFP+ SR4, 40G QSFP+ CSR4 and 100G QSFP28 SR4 optics direct connections and high-density data center.
MTP products’ Standard:
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
MTP Patch cable/trunk cable ’s Specification:
|Spec items.||Single mode (APC 8-degree polished)||Multimode (PC Flat polish)|
Insertion loss (MTP)
Standard MTP:≤0.75dB(max), ≤0.35dB(Typical)
Elite MTP:≤0.35dB(max), ≤0.20dB(Typical)
Standard MTP:≤0.6dB(max), ≤0.35(Typical)
Elite MTP:≤0.35dB(max) , ≤0.20dB(Typical)
|Return loss(MTP)||≥60dB(8degree polishing)||≥25dB|
|Durability||<0.3dBtypical change, 200 matings|
|Operating Temperature||-40 to + 85°C
MTP products’ Details& Standard:
|MTP Singlemode||IEC 61754-7||
SM APC: Green connectors+black boot (Standard Loss MTP)
SM APC: Yellow connectors+black boot (Elite MTP)
|MTP Multimode||IEC 61754-7||OM3&OM4 PC: Aqua connectors+black boot (Standard Loss&Elite MTP)|
Cable Parameters-12F Microfiber cable
Tensile Strength (N)
MTP End-Face 3D Interference Index
|Radius of curvature (mm)||ROC-X(ABS)||2000|
|Fiber height (nm)||1000nm||3500nm|
|Overall Length(L)(m)||length of tolerance(cm)|
|40<L||+0.5% x L/-0|
Pre-terminated MTP Technology-Polarity
Highlights : Push-pull tab MTP connector is easy to install and remove with one hand
1. High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules.
2. 3D interferometer provides verification of MTP/MPO polishing process, and making all parameters of the polished MT ferrule complies and exceeds industry standards.
3. The flexibility of the tester provides the complete spectrum of optical testing required for complex and high fiber count cable assemblies.
OMC industry co., limited, which was founded by an expert team, has been exporting FTTX passive products since 2007. We focus on providing innovative and integrated FTTX solutions for a variety of applications/Networks. Our capabilities include product/solution design, development, enhancement and integration. Our products are among the highest performing in the industry and truly represent the best values in the industry. We also offer training, pre and post-sales support. We help you select the right products for your Optical network's needs.
1. Are you the real factory?
Yes,we are the real factory more than 10 years
2. What is your main products?
Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop cables;
Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord.
3. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.
4. What is your delivery time?
Within 24 hours for normal kinds of fiber optic cable;
3~5 days for fiber optic patch cords with 10000 connectors.
5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 1KM
There is no MOQ required for fiber optic patch cords,as there’s stock for normal kinds.
6. Do you have distributor in other country or domestic?
Until now, we sell our products to customers directly. And factory price could be offered.
For large orders: T/T, L/C
For small orders: T/T,Western Union and Paypal are acceptable